| Anchor | ||||
|---|---|---|---|---|
|
There are three main steps to create and configure an RTView Solace Monitor AMI. "Prerequisites for Solace AMI", proceed to "Create Instance from RTView Monitor for Solace" and then "Add Message Router Connections".
| Anchor | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
...
http://IPAddress:8068/rtview/solmon_rtvadmin* if you are running the Monitor remotely (public IP Address from AWS Console). Note: you will be using a browser to connect to the AMI on port 8068 – please make sure that the security group you choose allows for access
Use rtvadmin/rtvadmin as the username/password. The RTView Configuration Application HOME page opens.
2. The configuration page for the Solace Message Router Monitor project opens.
3. Select Solace Message Router in the navigation tree (left panel).
The CONNECTIONS tab opens.
4. Select MESSAGE ROUTER and click 
to add a message router connection.
The Add Connection dialog opens.
5. In the Add Connection dialog: enter the Connection Name, URL, Username and Password, toggle on Edition if this is a VMR, enter the SEMP Version and the VPN Name.
Notes:
- if you want to collect additional metrics for a specific VPN, enter the VPN Name. Use this option carefully as this can increase the amount of data collected and impact monitor performance.
- if your message router is a Solace Cloud Edition VMR, toggle on the Edition option and enter the SEMP Version for previous versions to Solace 7.2. Otherwise, leave the default value.
Click 
to 6. Click to close the dialog
...
and (in the title bar) to save your settings.
The connections you create are listed in the Connections tab.
7. Repeat these steps to add multiple message routers and click when finished.
8. Click 
to return to the HOME page, then click 
to apply your settings.
The data server will be available again in 10-15 seconds. (Note that the RESTART
DATASERVER option is visible only if you saved your connection entries.)
9.
| Anchor | ||||
|---|---|---|---|---|
|
Use solmon/solmonpw for username/password (if login is enabled).
10. Verify that you see monitoring data. If you encounter issues, check the log files in
...
the RTViewSolaceMonitor/projects/rtview-server/log directory for errors.
...